Name | Cobalt Alloy Rod |
---|---|
Different Names | Stellite 12,stelita 12,Стеллит 12 |
Product Type | Rods, Tubes, Plates, Wires, Etc. |
Excellent Performance | Wear Resistant, Corrosion-resistant, And High-temperature Resistant |
Product Density | 8.35g/cm³ |
Density | 8.20g/cm3 |
---|---|
Product Surface | Black Or Bright |
Specification And Size | Cut According To Customer Requirements |
Chemical Composition | High Saturation Magnetic Induction Intensity Iron Cobalt Vanadium Soft Magnetic Alloy |
Product | Bars, Plates, Pipes, Forgings, Etc |
Density | 8.26 G/cm³ |
---|---|
Alloy | Fe-Ni-Cr Based Precipitation Hardening Wrought High Temperature Alloy |
Excellent | Corrosion Resistance |
Good | Mechanical Properties |
Widely Used In | Aerospace, Nuclear Power, Petrochemical And Metallurgical Industries |
Density | High |
---|---|
4J33 Alloy Is An | Iron-nickel-cobalt Alloy |
Elastic Modulus | High |
Low | Resistivity |
Elastic Modulus | Is 139 GPa |
Different Names | Stellite 12,stelita 12,Стеллит 12 |
---|---|
Excellent Performance | Wear Resistant, Corrosion-resistant, And High-temperature Resistant |
Product Density | 8.35g/cm³ |
Material Type | Cobalt Nickel Chromium Tungsten Cobalt Based Alloy |
Scope Of UseApplication Area | Cutting Tools, Chemical Equipment, Etc |
Composition | Iron (Fe), Nickel (Ni), Cobalt (Co), Manganese (Mn) |
---|---|
Thermal Expansion Coefficient | Low |
Curie Temperature | Typically Around 450°C |
Applications | Precision Instrument Parts, Thermostat Rods, Bimetal Strip |
Characteristics | High Thermal Expansion Coefficient, Stable Over A Wide Range |
Density | 8.1 G/cm³ |
---|---|
Alloy | Iron Nickel Alloy With Ultra-low Coefficient Of Expansion |
Mechanical Properties | Excellent |
The Tensile Strength Is About | 490-680 MPa |
Yield Strength | ≥ 240 MPa |
Name | Stellite 6 Alloy |
---|---|
Density | 8.4-8.5 G/cm³3 |
Delivery State | Black Or Bright |
Size And Dimensions | Customizable According To Needs |
Excellent Performance | Wear Resistant, Corrosion-resistant, And High-temperature Resistant |
Density | 8.1 G/cm³ |
---|---|
Alloy | Iron Nickel Alloy With Ultra-low Coefficient Of Expansion |
Mechanical Properties | Excellent |
The Tensile Strength Is About | 490-680 MPa |
Yield Strength | ≥ 240 MPa |
Density | 8.1 G/cm³ |
---|---|
Alloy | Iron Nickel Alloy With Ultra-low Coefficient Of Expansion |
Mechanical Properties | Excellent |
The Tensile Strength Is About | 490-680 MPa |
Yield Strength | ≥ 240 MPa |